WACKER® STABILIZER 43 – RTV-2 SILICONE RUBBER / MOLD MAKINGProduct descriptionThis additive is used to thicken or render non-sag those grades of the ELASTOSIL® M 46.. high-strength series which are flowable as supplied. Theeffect is such that, when – for example – a skin mold is being made, the silicone rubber can be applied even to inclined or vertical surfaces by brush or spatula without flowing off or sagging.The more additive added to the rubber mass, the thicker tem mass becomes.Thus, the whole range of thixotropic states can be attained, including the fully non-sag state.WACKER® STABILIZER 43 is a colorless, cloudy,medium-viscosity liquid with a faint odor.It is exclusively used to thicken those addition-curing RTV-2 silicone rubber grades of the ELASTOSIL® M 46 .. series which are flowable as supplied.ProcessingAddition of 0.3 – 0.5 wt % of WACKER® STABILIZER 43 (the exact proportion depending on the grade of rubber) confers excellent non-sag properties on thecatalyzed mix, at least for layers of up to 10 mm thickness, when applied to vertical surfaces.We recommend the following procedure for mixing in the additive as homogeneously as possible:1. Weigh out the silicone rubber base or Component A2. Add the required proportion of Catalyst or Component B3. Mix the mass thoroughly4. Weigh out and add the additive5. Mix the mass thoroughlyWhen small quantities of silicone rubber are processed, the additive is best added via a disposable pipette (20 drops ≈ 1 g).StorageThe ‘Best use before end’ date of each batch is shown on the product label.Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties requiredfor the intended use must be checked for quality assurance reasons Information on product safety (Manufacturer, Contact)Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, , www.wacker.com
Wacker STABILIZER 43 silicone rubber RTV-2 mold making 0.5kg/can
48 ₫
Wacker STABILIZER 43 silicone rubber RTV-2 mold making 0.5kg/can: Stabilizer for RTV-2 silicone ensuring consistent curing and performance.
