Perma PRO LC500 Lubricant cartridge with Staburags NBU 12/300 KP

Perma PRO LC500 Lubricant cartridge with Staburags NBU 12/300KP | N° 106769Staburags NBU 12/300KP Long-term grease for rolling and plain bearingsRolling and plain bearing greaseGood corrosion protectionGood pressure absorptionResistant to waterLong-term greaseReliable wear protectionTechnical specificationsChemical composition, type of oil: mineral oilLower service temperature: -20 °CUpper service temperature: 130 °CColour space: brownChemical composition, thickener: barium complex soapWorked penetration, DIN ISO 2137, 25 °C, lower limit value: 285 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value: 315 x 0.1 mmShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value: 5000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value: 9000 mPasDensity at 20 °C: ca. 0,97 g/cm³Drop point, DIN ISO 2176, IP 396: >= 220 °CKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: ca. 220 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: ca. 18 mm²/sApplicationsSTABURAGS NBU 12/300 KP is a rolling bearing grease for longterm and lifetime lubrication of drafting equipment in spinning machines (upper and lower rollers), tension and eccentric rollers, cardan shafts and rolling bearings in fans and ventilation systems. Perma PRO ​Multi-Point Lubrication Systems:PRO MP-6PRO MP-6 is a battery operated multi-point lubrication system.The MP-6 distributor discharges directly without pressure loss and enables tube extensions up to 5 m. PRO MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots.Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.Power supply: Battery PRO BPRO C MP-6PRO C MP-6 can also be operated in IMPULSE mode.The impulse for a lubricant discharge can be PLC controlled.Power is supplied via the machine and can be PLC monitored and controlled.PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots.Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.Power supply: External: 15–30 VPRO LINEPRO LINE is a special multi-point lubrication system for linear guides. Main applications for the multi-point lubrication system perma PRO LINE are linear guides.Application fields range from various linear guide and drive units in all kinds of industries – from automotive to paper. Other applications are roller and sliding bearings, open gears and spindles.Power supply: Battery PRO BPRO C LINEPRO C LINE is a special multi-point lubrication system with 1 – 6 outlet connections for linear guidesPRO C LINE receives its power from the machine and can be monitored and controlled via PLC.Main applications for the multi-point lubrication system perma PRO C LINE are linear guides.Application fields range from various linear guide systems and drives in the automotive industry to the paper industry. Other applications are roller and sliding bearings, open gears and spindles.Power supply: External: 15–30 V Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,