Motorex COOL-CORE FLUID Coolant additive for motor spindle systems 5L
119 ₫
Motorex COOL-CORE FLUID Coolant additive for motor spindle systems 5L – Additive for improving coolant performance.
Motorex COOL-CORE FLUID is used as an anti-corrosion additive in motor spindle cooling systems. The substances it contains passivate the various materials and provide long-term protection against corrosion. COOL-CORE FLUID is particularly useful for problem-free cooling of drive shafts where high-power fast-turning motor spindles are used. The additive can naturally also be used in systems that operate under less heavy loads.ApplicationOnly drinking water is acceptable for use when preparing COOL-CORE FLUID and this water must not exceed the following limits:Water hardness 3.6 mmol/l Chloride 100 ppm Sulphate 100 ppmMix one part of COOL-CORE FLUID with two parts (1/3:2/3) of drinking water. Only use clean containers for preparing the mixture. Pour the mixture into the prepared cooling system immediately.If these values are outside the permissible range, COOL-CORE READY must be used. Where the fluid is used in optimum conditions and the instructions for use are complied with, the coolant can remain in use for up to four years.Important: Galvanised components or similar materials must not be used either in the cooling system or in the mixing or storage containers. An average operating temperature of 20-25°C will provide very effective long-term protection for elastomers. These advantageous conditions can be obtained using a cooling unit that will stabilise the temperature. CharacteristicsPrevents electrochemical corrosion Protects aluminium, ferrous and non-ferrous metals Low-maintenance Long-term protection Size: 5lPackaging type: canisterAlso available in: 20l canister, 200l barrelTechnical specifications Colour blue Density at 20 °C 1.055 g/ml pH value at 20 °C 7.5 – 8.5 Pourpoint -50 °C Factor for hand-held refractometers 1.34 %Brix-¹ Utilization temperature range 4 – 80 °C Water hazard class WGK1 Information on product safety (Manufacturer, Contact)MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, , www.motorex.com
Thông tin liên hệ
Khẳng định uy tín từ nhiều năm kinh nghiệm trong lĩnh vực cung cấp sản phẩm công nghiệp vì vậy chắc chắn bạn nên lựa chọn mua Motorex COOL-CORE FLUID Coolant additive for motor spindle systems 5L tại topcongnghiep.vn
Top Công Nghiệp cam kết đảm bảo chất lượng của sản phẩm đúng như yêu cầu từ khách hàng và cung cấp đầy đủ COA, MSDS, TDS cho từng sản phẩm. Vui lòng liên hệ ngay theo liên hệ sau:
Điện thoại: 0966068726 (call, zalo, whatapp)
Email: [email protected]
Địa chỉ:toà nhà sông Đà, đường Phạm Hùng, phường Mỹ Đình 1, quận Nam Từ Liêm, Hà Nội