Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine HighlightsHighly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant)Can be used at temperatures up to 1400°C (2552°F)Coefficient of friction in the range of oiled boltsLow scatter of prestressing force on tighteningAvoidance of stress cracks and solder brittlenessEnables non-destructive loosening of bolted joints even after long use at high temperaturesComplies with Siemens TLV 9600 02/01Complies with General Electric TIL 1117-3RIComplies with EDF-PMUC 04034 Complies with Pratt & Whitney PWA-36246ApplicationSuitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat resistant steels, eg those made from nickel-based alloysUsed successfully for the bolted joints of gas and steam turbines in power stationsTechnical specificationsCompositionSolid lubricants in practically sulphur free, partly, synthetic oilThickenerAdhesion improverPhysical formcuring compoundColorGrey-blackPenetration unworked (ISO 2137)280 to 310 mm/10Weld load (DIN 51 350 T.4)4400 NWear scar under 800N load (DIN 51 350 T.5)1.7 mmScrew test – µ thread0.15Screw test – µ head0.09Initial break-away torque126 NmDensity at 20°C (68°F) (ISO 2811)1.2 g/molUsage temperature range-40 °C to 1400 °C (2552 °F) Hazards Information (CLP)Signal Word: DANGER.Hazard Statements (H-phrases)H315: Causes skin irritation.H318: Causes serious eye damage.Precautionary Statements (P-phrases)Prevention:P264: Wash skin thoroughly after handling.P280: Wear protective gloves/ eye protection/ face protection.Response:P302 + P352: IF ON SKIN: Wash with plenty of water.P305 + P351 + P338 + P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.P332 + P313: If skin irritation occurs: Get medical advice/attention.P362 + P364: Take off contaminated clothing and wash it before reuse.Additional InformationThe following percentage of the mixture consists of ingredient(s) of unknown acute dermal toxicity: 29%. Information on product safety (Manufacturer, Contact)DuPont de Nemours (Deutschland) GmbH, Hugenottenallee 175, 63263 NEU-ISENBURG, GERMANY, +49 (0) 6102 18 – 0, , www.dupont.de
Molykote P-37 Lubrifant antiseize paste 1kg can
Molykote P-37 Lubrifant antiseize paste 1kg can – Anti-seize paste formulated to prevent galling, corrosion, and seizing on threaded connections under extreme temperatures and loads.
