Exxon Mobil SHC™ 524 is a fully synthetic hydraulic oil (ISO VG 32) with exceptional performance for wide temperature use (DENISON HF-0, HF-1, HF-2 approved).ApplicationHydraulic systems prone to deposit build-up such as sophisticated Numerically Controlled (NC) machines, particularly where close clearance servo-valves are usedSystems employing multi-metal component designsHigh pressure vane, piston and gear pumpsSystems where cold start-up and / or very high operating temperatures are typical Where small amounts of water are unavoidableIn systems containing gears and bearings Systems requiring a high degree of load-carrying capability and anti-wear protectionApplications where thin oil-film corrosion protection is an asset such as in systems containing moistureApprovalsDENISON HF-0DENISON HF-1DENISON HF-2Specifications & ApprovalsDesign-Specific synthetic base stockExceptional anti-wearHigh viscosity indexOutstanding oxidation stabilityExcellent corrosion protectionVery good multi-metal compatibilityMeets a wide range of equipment requirementsExcellent air separation characteristicsControlled demulsibilityInnovative keep clean propertiesSize: 20l canisterAlso available in: 208l barrelAdvantages and Potential BenefitsHelps extend service intervalsCleaner system and reduced close-tolerance valve sticking compared to conventional productsHelps improve filterabilityHelps reduce wear of componentsHelps protect systems using various metallurgyWide temperature range performanceHelps to ensure equipment protection at cold start-up temperaturesHelps protect system components at high operating temperaturesHelps provide long oil and equipment life, which can extend filter lifeHelps prevent internal hydraulic system corrosionHelps reduce the negative effects of moisture in systemsHelps provide corrosion protection of multi-metallurgy component designsHelps optimize inventory requirementsOne product can replace several helping to optimize inventory requirements and mitigate potential product misapplicationHelps reduce foaming and it’s negative effectsProvides systems protection and lubrication where small quantities of moisture are presentReadily separates larger quantities of waterHelps reduce system deposits and potential sludgingHelps protect critical components such as servo-valves, improving system response and minimizing valve stickingTechnical specifications Manufacture number 127659 Grade ISO 32 Brookfield Viscosity @ -18 C, mPa.s, ASTM D2983 923 Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130 1B Density @ 15 C, kg/l, ASTM D4052 0.853 Emulsion, Time to 40/37/3, 54 C, min, ASTM D1401 20 FZG Scuffing, Fail Stage, DIN 51354 9 Flash Point, Cleveland Open Cup, °C, ASTM D92 234 Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 6.4 Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 32 Pour Point, °C, ASTM D97 -56 Rust Characteristics, Procedure B, ASTM D665 PASS Viscosity Index, ASTM D2270 144Product DescriptionMobil SHC™ 500 Series oils are exceptional performance hydraulic oils formulated from synthesised, wax-free hydrocarbon base fluids combined with a carefully engineered super-stabilised additive system. They are exceptionally high quality, wide-temperature, shear-stable hydraulic oils with controlled low-temperature pumpability properties and maximised anti-wear protection for high-pressure vane, piston and gear pumps. The products exhibit very high viscosity indexes contributing to their excellent low and high temperature performance making them an excellent choice for equipment that is subjected to a wide range of start-up and operating temperatures. The Mobil SHC 500 Series oils exhibit outstanding shear stability allowing their use in high-pressure, high-temperature operating environments for extended periods of time without the loss of critical lubrication characteristics.The Mobil SHC 500 Series oils help provide long oil/filter life and optimum equipment protection, which can reduce both maintenance and product disposal costs. They were developed in conjunction with the major OEMs to meet the stringent requirements of severe hydraulic systems using high pressure, high output pumps as well as handling the critical requirements of other hydraulic system components such as close clearance servo-valves and the high accuracy numerically controlled (NC) machine tools. These products meet some of the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers, using various multi-metallurgy designs, ensuring a single product with exceptional performance characteristics in a wide range of equipment. They are designed to work with systems operating under severe conditions where high levels of anti-wear and film strength protection are needed, yet they are formulated to work where non-anti-wear hydraulic oils are generally recommended. Information on product safety (Manufacturer, Contact)EXXONMOBIL CENTRAL EUROPE HOLDING GMBH, Ericusspitze 2, 20457 Hamburg, GERMANY, +49 40 6393 0, , www.exxonmobil.de
Mobil SHC 524 Synthetic hydraulic oil ISO VG 32, 20L canister
321 ₫
Mobil SHC 524 Synthetic hydraulic oil ISO VG 32, 20L canister provides premium synthetic performance with excellent low-temperature fluidity and wear protection.
