LOCTITE® 675 is a green, very low viscosity, high strength, slow curing methacrylate retaining compound. Fixture time on steel is 45 min. Maximum diametrical clearance is 0.1 mm and service temperature -55 to + 150ºC. Pack size: 50 ml bottle (Loctite no. 234940)Also available as: 250 ml bottleApplicationLocks bearings on shafts and in housings.Bonds sleeves, wear rings and bushings in place.Augments press fits.Bonds pivot pins, adapters and plugs in place.Seals mechanical fits that have small clearancesCharacteristicsHigh strength, very low viscosity1-part product, requires no mixingSlow curingIdeal for close fitting press fitsAlso for loose fitting slip fitsTechnical InformationChemical BasisMethacrylateColorGreenComponents1 partFixture Time45 min.Dielectric Strength250 V/milFlash Point>93.3 °CService Temperature18.3 to 148.8 °CShear Strength20.0 N/mm²Specific Gravity1.109Viscosity100 to 150 @ 25 °CHazard Information (CLP)Signal word: Danger.Hazard StatementsH315: Causes skin irritation.H317: May cause an allergic skin reaction.H318: Causes serious eye damage.H335: May cause respiratory irritation.H412: Harmful to aquatic life with long lasting effects.Precautionary StatementsFor consumer use only:P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P501: Dispose of waste and residues in accordance with local authority requirements.Prevention:P261: Avoid breathing vapors.P273: Avoid release to the environment.P280: Wear protective gloves/eye protection.Response:P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P333+P313: If skin irritation or rash occurs: Get medical advice/attention.P302+P352: IF ON SKIN: Wash with plenty of soap and water.Additional LabelingNo additional information.Storage and DisposalNo special requirements when used properly.Hazard Classification Hazard Class Hazard Category Target Organ Skin irritation Category 2 Skin Serious eye damage/eye irritation Category 1 Eyes Skin sensitizer Category 1 Skin Target Organ Systemic Toxicant – Single exposure Category 3 Respiratory tract Acute hazards to the aquatic environment Category 2 Aquatic ecosystems Chronic hazards to the aquatic environment Category 2 Aquatic ecosystems Label ElementsSDS No.: 450729 | Version: V001.3 | Product: LOCTITE 680 RCSignal Word: DangerHazard Statements H315: Causes skin irritation. H317: May cause an allergic skin reaction. H318: Causes serious eye damage. H335: May cause respiratory irritation. H411: Toxic to aquatic life with long-lasting effects.Precautionary StatementsPrevention: P261: Avoid breathing mist/vapors. P264: Wash hands thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves, eye protection, and face protection.Response: P302+P352: IF ON SKIN: Wash with plenty of water. P304+P340+P312: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. P305+P351+P338+P315: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing. Get immediate medical advice/attention. P333+P313: If skin irritation or rash occurs: Get medical advice/attention. P362+P364: Take off contaminated clothing and wash it before reuse. P391: Collect spillage.Storage: P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up.Disposal: P501: Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations. Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com
Loctite 675 Retaining Compound slow curing high strength green 50 ml
Loctite 675 Retaining Compound slow curing high strength green 50 ml delivers long-lasting, slow-curing high-strength bonding for metal components.
