Klübertemp YV 93-302 Sliding agent for valves, fittings 1kg tin

Klübertemp YV 93-302 Sliding agent for valves, fittings and installations carrying oxygen up to medium partial pressure | N° 013063Klübertemp YV 93-302 is a white sliding agent with good wetting ability based on perfluorinated polyether, solid lubricants and PTFE.It offers medium oxygen pressure surge resistance and high resistance to a wide range of chemicals. To ensure continuous adherence to this high quality standard, Klübertemp YV 93-302 is manufactured in small series subject to strict hygiene requirements and each batch is inspected based on M 034-1 list of nonmetallic materials (213-075).Volume: 1 kg can Benefits for your applicationHigh operational reliability for installations and components used with gaseous oxygen due tomedium oxygen pressure surge resistance (see product data)compatibility with most materials used in this industrya wide service temperature rangeEach product batch is checked for its reactivity to oxygenApplicationsKlübertemp YV 93-302 is a tried-and-tested sliding agent for all friction points with low to medium requirements and in combination with all materials used in gaseous oxygen installations.Possible applications are:Oxygen valvesPeripheral aggregates of chemical installationsHose couplings, e.g. oxygen pipe connections, sliding and plain bearings, bolts, slideways, etc.Steel and heavy industryAssembly aid for most rubber-elastic materials and plasticsFor the industrial handling, maintenance and care of oxygen componentsApplication notesAll surfaces to be wetted must be thoroughly cleaned prior to product application.The friction / lubrication points of surfaces / components must be clean and bright (i.e. free from oil, grease, dirt particles or perspiration). We recommend cleaning the surfaces with clean white spirit and then Klüberalfa XZ 3-1, ensuring residue-free surfaces when dried. For valves and installations carrying oxygen, the application procedure must also be oxygen clean in order to attain a ready for oxygen service condition. Technical specifications Chemical composition, type of oil  PFPE Colour space white Worked penetration, DIN ISO 2137, 25 °C, lower limit value  265 x 0.1 mm Texture  homogeneous Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Chemical composition  solid lubricant Density at 20 °C ca. 2,00 g/cm³ Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer ca. 7500 mPas Lower service temperature -60 °C Upper service temperature 200 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com