Klübersynth VR 69-252 Lubrication grease for drink water fittings 25kg

Lubricating grease for drinking water fittings with EPDM elastomersspecial lubricating grease based on fatty oil and an inorganic thickenerhigh load-carrying capacity and marked adhesiveness in cold and hot water applicationsmeets the specifications of the European standard DIN EN 200 well above the required endurance of 200,000 load cycles at a closing force of 2.5 Nm.Size: 25kg bucketAlso available as: Cartridge: 400g; Can: 1kgBenefits for your applicationSpecial lubricating grease for hot and cold water fittingsEspecially suitable for spindle heads with EPDM elastomersExcellent adhesiveness and high load-carrying capacityApplicationlubrication of all friction points subject to mechanical loads in spindle heads with EPDM elastomers, check and control valves, shower and heating fittings, and generally for the lubrication of seals that require a grease compatible with EPDM and in compliance with statutory drinking water regulations.Technical Specifications Article number0121700177Worked penetration, DIN ISO 2137, 25 °C, upper limit value310 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, lower limit value280 x 0.1 mmShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value12 000 mPasShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value6 000 mPasCopper corrosion, DIN 51811, (lubricating grease), 24h/100°C1 – 100 corrosion degreeColour spacegreenDensity at 20 °Capprox. 1.00 g/cm³Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopenedoriginal container, approx.24 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com