Synthetic lubricating grease suitable for use in the food-processing and pharmaceutical industries.Klübersynth UH1 64-62 shows a good low- and hightemperature behaviour, and good resistance to water, corrosion, ageing and oxidation.Klübersynth UH1 64-62 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 64-62 can contribute to increase reliability of your production processes.We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Content: 1kg tinBenefits for your application:Less maintenance due to good resistance to low and high temperatures, synthetic base oil for extended relubrication intervals and good resistance to waterISO 21469 certified – supports the compliance with the hygienic requirements in your production.Application:Klübersynth UH1 64-62 is suitable for lubrication points in machines and installations used in the food-processing and pharmaceutical industries, particularly for all points where contact between the lubricant and the food product cannot be excluded. We recommend lubricating all friction points with Klübersynth UH1 64-62 in order to avoid negative effects caused by lubricant spreading.Application notes:Klübersynth UH1 64-62 is applied by brush, spatula, grease gun or grease cartridge. Before using Klübersynth UH1 64-62 to replace other greases, the bearings should be cleaned thoroughly. Grease exchange by relubrication is sufficient if the greases are miscible.Product data: Article number 096046 NSF-H1 registration 136 871 Chemical composition, type of oil ester oil Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, thickener silicate Lower service temperature -40 °C / -40 °F Upper service temperature 140 °C / 284 °F Color space beige Texture homogeneous Density at 20 °C approx. 0.93 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 65 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 10 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer approx. 3 000 mPas Drop point, DIN ISO 2176, IP 396 >= 250 °C Speed factor (n x dm) approx. 500 000 mm/min Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C <= 1 400 mbar Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com
Klübersynth UH1 64-62 Synthetic lubricating grease 1kg tin
149 ₫
Klübersynth UH1 64-62 Synthetic lubricating grease 1kg tin ensures safe lubrication with food-grade compliance and high performance.
