DescriptionKlübersynth HB 74-401 is a lubricating grease based on a high-quality synthetic base oil thickened with a polyurea.This combination enables long-term lubrication over a wide temperature range.In addition, good wear protection under high loads is achieved due to the high base oil viscosity and special additives.Benefits for your applicationExtended component life due to good wear and corrosion protectionCost reduction possible due to longer relubrication intervals, even at higher temperatures, based on the synthetic grease conceptType reduction possible due to the versatile usability over a wide temperature rangeApplication areasKlübersynth HB 74-401 is primarily used in roller and plain bearings at high temperatures, e.g. in the steel or cement industry.Possible areas of application:Rollers in continuous casting plantsTransport roller bearings in continuous furnacesRoller-roller bearings in vertical millsPinion bearingApplication NotesKlübersynth HB 74-401 can be applied with a spatula, brush and grease gun or with standard central lubrication systems.Ideally, before greasing with Klübersynth HB 74-401, the lubricating point should be cleaned and the old grease removed.If it is not possible to clean the lubrication point for technical reasons, the grease can be replaced by more frequent relubrication in the initial period after the changeover.Technical specifications Article number 004282 Colour space beige Texture homogeneous Texture fibrous Lower service temperature -40 °C Upper service temperature 200 °C NLGI grade, DIN 51818 1 Density at 20 °C approx. 0.85 g/cm³ Drop point, DIN ISO 2176, IP 396 >= 220 °CFlow pressure of lubricating greases, DIN 51805, test temperature: -55 °C<= 1 400 mbarWorked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 24 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 4.6 mm²/sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:1 week, distilled water<= 1 corrosion degreeMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopenedoriginal container, approx.36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com
Klübersynth HB 74-401 Synthetic high temperature grease 370g
50 ₫
Klübersynth HB 74-401 Synthetic high temperature grease 370g – Synthetic grease offering excellent thermal resistance and long-lasting lubrication.
