Klüber Klüberfood NH1 14-222 Synthetic lubricating grease for universal application in the food- processing and pharmaceutical industries | N° 081280Klüberfood NH1 14-222 Spray was developed to meet the special requirements of the food-processing and pharmaceutical industries.Klüberfood NH1 14-222 Spray is a speciality grease based on a synthetic hydrocarbon oil and an aluminium complex soap.Klüberfood NH1 14-222 Spray is NSF H1 registered and was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.The use of Klüberfood NH1 14-222 Spray can contribute to increase safety of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Temperature range: -25°C to +120°C Volume: 400ml spray canBenefits for your applicationFully synthetic grease for long relubrication intervalsEasy spray applicationFacilitates product streamlining owing to its wide range of applicationsOffers improved surface protection through good water resistanceNSF H1-registered increasing process reliabilityApplicationKlüberfood NH 1 14-222 Spray is used in machines, installations and equipment of the food-processing and pharmaceutical industries, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product.This lubricant is intended for the universal lubrication of lifting cylinders, joints, guide rods and rails, cams, etc.Application notesShake well before use and then spray. Ensure sufficient ventilation as explosive mixtures may form.Do not spray on naked flame, incandescent or hot objects. Please do not use spray in enclosed space, e.g. electrical cabinets.Observe additional application notes in the material safety data sheet and on the can label.Before applying Klüberfood NH1 14-222 Spray, the lubrication points should be thoroughly cleaned so as to ensure maximum hygiene, which is mandatory for H1 lubrication.Technical specifications Article number 0812800511 Lower service temperature -25 °C / -13 °F Upper service temperature 120 °C / 248 °F Colour space beige Texture homogeneous Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm NLGI grade, DIN 51818 2 Low-temperature torque, IP 186, – 25 °C, start <= 1 000 mNm Low-temperature torque, IP 186, - 25 °C, running <= 100 mNm Drop point, DIN ISO 2176, IP 396 >= 220 °C Hazard Statements (CLP)Signal word: DangerHazard Statements (H-phrases)H222: Extremely flammable aerosol.H229: Pressurized container: may burst if heated.H304: May be fatal if swallowed and enters airways.H315: Causes skin irritation.H336: May cause drowsiness or dizziness.H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-phrases)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P273: Avoid release to the environment.Response:P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.P331: Do NOT induce vomiting.Storage:P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com
Klüberfood NH1 14-222 Grease for food processing 400ml Spray can
48 ₫
Klüberfood NH1 14-222 Grease for food processing 400ml spray can provides easy application for food machinery maintenance.
