DELO-DUOPOX® SJ8665 is a room-temperature curing, high-strength 2-component epoxy adhesive with excellent temperature resistance up to +180 °C. Especially suitable for electric motor applications.Packaging: 50 ml double cartridgeAlso available in: 200 ml double cartridge, 8.4 kg bulk unitApplicationsStructural bonding of metalsElectronics and electric motor assemblyComponents exposed to high temperatures (-40 °C to +180 °C)Mechanical engineering, electrical engineering, and automotive industryFeaturesHigh-strength adhesive with shear strength up to 32 MPaGap-filling and impact-resistantMedium viscosityRoom-temperature curing: initial strength after 3.5 h, functional strength after 5 h, full cure after 7 daysAccelerated curing at +80 °C: full cure after 60 minVOC-compliant according to GB33372-2020Ready to useTechnical DataPhysical PropertiesColor (cured)BlackTransparencyOpaqueMix ratio (vol. / wt.)2:1 / 1.65:1Density component A / B1.16 / 1.41 g/cm³Viscosity A / B300,000 / 30,000 mPa·sProcessing time (20 g / 100 g, RT)15 min / 40 minShrinkage (RT / 80 °C)3 vol.-% / 3 vol.-%Water absorption (24 h)0.15 wt.-%Mechanical PropertiesShear strength (Al/Al / Steel/Steel)32 MPa / 24 MPaCompressive shear strength30 MPaTensile strength46 MPaElongation at break3.5 %Shore hardness D (RT / 80 °C)77 / 82Elastic modulus3300 MPaThermal PropertiesService temperature range-40 °C to +180 °CGlass transition temperature (Tg)126 °CDecomposition temperature294 °CThermal expansion (35–100 °C / 120–175 °C)82 / 171 ppm/K* All technical values determined under laboratory conditions at +23 °C / 50 % r.h.Suitability for practical use must be verified for the specific application.Application NotesApply using dual-chamber cartridge with static mixing nozzleClean and optionally roughen bonding surfacesCuring can be accelerated with heatRecommended AccessoriesMixing nozzle: Dispensing gun: Cleaner: Storage & Shelf LifeShelf life unopened: 12 months at +15 °C to +30 °CStore dry, frost-free, and in original packagingHazard Identification (CLP) – Component ASignal word: Warning.Hazard Statements (H-Sentences)Causes skin irritation.May cause allergic skin reactions.Causes serious eye irritation.Toxic to aquatic organisms, with long-lasting effects.Precautionary Statements (P-Sentences)Prevention:Wear protective gloves (1-4 hours breakthrough time: recommended Viton® fluoroelastomer / short-term exposure < 15 min nitrile gloves).Wear eye protection or face protection.Avoid release to the environment.Avoid inhaling vapors.Wash thoroughly after use.Response:If on skin: Wash with plenty of water and seek medical advice if irritation occurs.If in eyes: Rinse carefully with water for several minutes, remove contact lenses if possible, continue rinsing and immediately seek medical advice if irritation persists.Storage and DisposalNot applicable.Hazard Identification (CLP) - Component BSignal word: Danger.Hazard Statements (H-Sentences)Causes severe skin burns and eye damage.May cause allergic skin reactions.May harm the unborn child.Damages organs with prolonged or repeated exposure.Harmful to aquatic organisms, with long-lasting effects.Precautionary Statements (P-Sentences)Prevention:Seek special instructions before use. Wear protective gloves (1-4 hours breakthrough time: recommended Viton® fluoroelastomer / short-term exposure < 15 min nitrile gloves).Wear protective clothing, eye protection, or face protection.Avoid release to the environment.Avoid inhaling vapors.Do not eat, drink, or smoke during use.Response:If inhaled: Immediately call the Poison Center or a doctor.If swallowed: Immediately call the Poison Center or a doctor, rinse mouth, DO NOT induce vomiting.If on skin (or hair): Immediately remove contaminated clothing, wash skin with water, immediately call the Poison Center or a doctor.If in eyes: Rinse carefully with water for several minutes, remove contact lenses if possible, continue rinsing, and immediately call the Poison Center or a doctor.Storage and DisposalNot applicable.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA, Information on product safety (Manufacturer, Contact)DELO Industrie Klebstoffe GmbH & Co. KGaA, DELO-Allee 1, 86949 Windach, GERMANY, +49 8193 9900-0, , www.delo.de
Delo Duopox SJ8665 Heat-Resistant Two-part Epoxy Adhesive 50ml
36 ₫
Delo Duopox SJ8665 Heat-Resistant Two-part Epoxy Adhesive 50ml: Heat-resistant epoxy offering reliable bonding under high temperatures.
