Castrol Tribol™ CH 1430 Spray (previously called Tribol 1430 Spray) high-temperature chain oil is formulated for the lubrication of oven chains for temperatures up to 240 °C (short term max. 270 °C). The low evaporation tendency of the high-quality aromatic ester synthetic base fluid ensures extended lubrication intervals as well as a clean and economic application.ApplicationTribol CH 1430 high-temperature chain oil is especially recommended for chain lubrication at temperatures up to 240 °C with short term maximum temperature of 270 °CIt is used for the lubrication of oven chains in lithographic printing plants and in the coating industry, as well as in drying ovens in the automotive industry.It may be applied by drip, spray, splash and pressurized lubricating systems compatible with oils of this viscosity.AdvantagesThe good evaporation characteristics of Tribol 1430 Spray can often reduce the lubricant amount to be applied and/or extend the interval between reapplicationReduced applications minimize soiling due to dripping or blow-offExcellent fluid film and anti-wear properties control chain wearSelf-cleaning action all but eliminates the need to stop production to periodically clean some equipmentTribol 1430 Spray also tends to dissolve and facilitate the removal of carbonaceous residues left by previous lubricantsFire and explosion hazards are greatly reduced. The ignition temperature far exceeds that of petroleum productsLow residue forming properties – any residues formed are still fluid and have lubricating propertiesCompatible with the following sealing materials: Fluoroelastomers, silicone rubber, nitrile rubber (with more than 30%, acrylonitrile) and EPDM-elastomersExcellent wetting and adhesive propertiesCost reductions may be achieved by reduced friction, extended lubrication cycles, reduced soiling, decreased downtime for repairs and maintenance and longer service life of machine componentsTechnical specificationsDensity at 15°C: 949 kg/m3Kinematic Viscosity at 40°C: 150 mm²/sKinematic Viscosity at 100°C: 17.1 mm²/sViscosity Index: 124Flash Point – open cup method: 268°CPour Point: -33°CVolume: 400ml spray canAlso available in: 20l canister, 60l barrel, 208l barrelGLIS number: 15E1B3MSDS code: 468655Castrol Tribol CH™ 1430, CH1430, CH-1430Hazards (CLP)Signal word: DangerHazard statementsH222, H229: Extremely flammable aerosol. Pressurized container: May burst if heated.H319: Causes serious eye irritation.Precautionary statementsPrevention:P280: Wear eye protection or face protection.P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P264: Wash hands thoroughly after use.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.Storage:P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.Disposal:Disposal: Not applicable.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA, Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com
Castrol Tribol CH 1430 Spray High-temperature chain oil 400ml
213 ₫
Castrol Tribol CH 1430 Spray High-temperature chain oil 400ml – Aerosol high-temperature chain oil for industrial conveyors.
